JAY KHODIYAR MACHINE TOOLS®
Mobile No. : + 91 -8000000076
E-mail : info@jaykhodiyargroup.com
export@jaykhodiyargroup.com
E-mail : info@jaykhodiyargroup.com
export@jaykhodiyargroup.com
Social Networking : |
|---|
 |
 |
 |
 |
 |
|---|
 |
|---|
PELLET MILL
THE BRQ SERIES BRIQUETTING PRESSES
In India the cost coal is very high and the quality is very low. This problem has led people to seek alternative types of energy.
It gives a much higher boiler Efficiency compared to firewood or loose biomass because of low moisture, higher
bulk density and lower ash content.
bulk density and lower ash content.
There is no fly ash when briquettes are burnt.
Combustion is more uniform compared to coal and boiler response to changes in steam requirement is faster
due to higher quantity of volatile matter in briquettes.
due to higher quantity of volatile matter in briquettes.
It doesn'temitSulfurlikecoal.
It is a carbon neutral renewable fuel.
It has a consistent quality,and it is clean and easy to handle.
JAY KHODIYAR has developed technology for briquetting any type of biomass. So far, we have briquetted the following materials:
Saw Dust
Sander and Bamboo Dust
Mustard Stalk
CottonStalk
CoffeeHusk
RiceHusk
Peanut Shell
SugarCanePulp
Maize Straw
Pine Needles
The briquetting press a crank type mechanical press with two flywheels. One flywheel is driven by the main motor through a continuous flat belt. Forced lubrication oil circulating system guarantees a long service life. Ground material is fed through a hopper by meansofaverticalscrewwithit'sown gearbox and motor. The vertical screw forces the material downwards into the feeding chamber. From the feeding chamber, the material is forced by the ram through a tapered die system onto the cooling line in the form of briquettes. The cooling line conducts the material to the storage area. The entire operation is controlled from the electrical control panel
Briquetting Press Features:
Stress relieved and precision bored body
Hardened alloy steel crankshaft and crosshead
Forced lubrication
Automatic stoppage of press on low oil pressure
Tight geometric tolerances and longer life for moving components
and Bearings
and Bearings
Smaller clearance between wear ring and the ram tip, for longer
life of Wear tools
life of Wear tools
Water cooling of head stock for round the clock operation
Effective separation of oil and dust areas
Easier die holder mounting and clearing of clogged die holder
Balanced crankshaft assembly
Press Model
BRT diameter (mm)
Stroke length (mm)
Rated production (tons/hr)
Power (hp)
BRQ 40
40-42
10-100
250 Kg
16
BRQ 50
50-52
12-150
500 Kg
33
BRQ 60
60-62
15-180
750 Kg
45
BRQ 70
70-72
18-200
850 Kg
55
BRQ 9050
90-92
18-200
1000 Kg
64
BRQ 9075
90-92
18-200
1500-2.0 Kg
88.5
